We are offering the VSWR sensor (measuring bridge(MB1)) and detector head (DH1), which are used in a set with measuring units (sweep frequency generator (SFG) and indicator unit (Я2Р-70) of P2-102 device.

Designation  of P2-102 device are:  panoramic displaying on the indicator  and measurement of VSWR frequency characteristics and attenuation of elements of the coaxial tract. It is used in laboratory and enterprises bay at measurement and adjustment of VSWR parameters and attenuation of various microwave devices.

VSWR sensor (MB1) parameters

Detector head (DH1) it intended for formation of low-frequency signals proportional to the power level of the microwave signals.
It is used for measurement of the module of transmission coefficient , amplification, attenuation, and for power measurement. Due to using of special designs (with the built — in amplifier with frequency F0=100 kHz) and resent element base the detector head has a bandwidth of frequencies and measured powers, small irregularity amplitude-frequency characteristics, low value of VSWR input.

Multichannel digital analyzers is a high-performance, fast(response) device with a standard PC, intended for checking and characterization of digital circuits. Carries out grouping of input channel in serial bus.

• internal synchronization mode(at recording of input data is used the internal clock frequency oscillator);
• external synchronization mode (at recording of input data is used the external clock frequency oscillator)

Multichannel digital analyzer includes:

• module of the logical analyzer;
• personal computer (PC);
• software.

Modifications DA-A1…DA-A4 have the additional opportunity to measure the analog signal from 10 mV to 10 V.

SPECIFICATIONS

The controller by technological processes is indented for organization of remote switching ON/OFF,controlling and measuring up to 8 (with opportunity to increase up to 24), and regulation up to 8 (with opportunity to increase up to 16) parameters.

Provides the following types of adjustment:

• manual (by inserted the necessary value);
• automatic (the algorithm and value of limits of adjustable parameters are set ). The accuracy of adjustment depends on the given algorithm.

• micro-controller (MC) with analog-digital converter based on pulse-duration modulation (ADC-PDM);
• analog-digital converter based on pulse-code modulation (ADC);
• nonvolatile RM;
• interface of sequential standard ports RS-232 and RS-485;
• interface of control and indication (ICI). Consists of the keyboard (16 keys) and liquid-crystal detector (LCD) with lighting control;
• analog commutator (AC);
• clock with RAM;
• attenuator (Att);
• analog filter and level converter (AFLC);
• keys (photon-coupled and transistor).

SPECIFICATIONS

We propose the thin film temperature sensors made ​​on the basis of the platinum resistor and having long term stability, durability and reproducible of performance. It is used for precise temperature control of processes.

SPECIFICATIONS

 We are offering the thin-film high-speed hydrogen sensors, operated at low operating temperature

Provides:

• high sensitivity and selectivity to hydrogen gas;
• low operating temperature;
• low power consumption;
• fast response and recovery times;
• continuous time of stabile operation at  up 0 to 98% humidity.

 Fields of application 

Automated systems for explosion prevention.

Control of space power generating system.

Safety systems for automobiles working by hydrogen fuels.

Fuel cells.

Explosibility monitoring of powerful electric accumulators and oscillators for leak coolant detection.

Monitoring systems of  flow processes and detectors of hydrogen leak.

Smoke’s multisensory detector.

Electron pumps.

SPECIFICATION

The given product is developed together with the Center of semiconductor devices and nanotechnologies of the Yerevan State University